Technical Data
| Diameter (outer dimension): | 50.5 mm |
| Suitable for: | Spinel Pinocchio |
Spinel O-ring, brewing head gasket
The replacement brewing head seal ensures that the brewing chamber is sealed, thus ensuring even and complete coffee extraction. As the name suggests, it is located in the brewing head of the coffee machine. Compatible with our Spinel Pinocchio E.S.E. pod machine.
CHF 6.90
Free shipping for orders above CHF 90.
Specification
How to change the O-Ring
- Move the operating lever of the machine upwards so that the brewing chamber is open
- Pierce the old seal with a pointed object and pull it downwards or remove it and dispose of it
- clean the narrow joint where the seal was located with a cloth or paper tip
- Press the new seal into the joint at four points, according to the clock alignment at approximately 12 / 3 / 6 / 9.
- Open and close the brew group several times using the operating lever. This presses the seal evenly and completely into the joint. The machine is now ready for use again.
